english prs74_e.htm, updated: 31 MAY 2010; 19% VAT german

Price list accessories for wave transmitters 2,4 GHz
Order
information		 Short description         Prices        
Ant-TX-S110R
 
Ant-TX.S110R 		Transmit antenna 2,4 GHz

Type: Stick
Length about: 110 mm
Connector type: R-SMA
Antenna gain: ca. 2 dBi
 incl. 19% V.A.T.
14.90 €
Shipping costs
without V.A.T.
(12.52 €)
Ant-Halter-uno
 
Ant-Halter-uno 		Small antenna holder
for one transmitter antenna.

The antenna holder and wire must be mounted in the lower hole.

The holder itself must be fastened with the Ant.Schraube into the old antenna socket of the transmitter.

Acrylic glass thickness: 3 mm
Colour of the holder: gray transparent (not as shown brown transparent).
 incl. 19% V.A.T.
12.00 €
Shipping costs
without V.A.T.
(10.08 €)
Ant-Halter-duo
 
Ant-Halter-duo 		Long antenna holder
for two transmit antennas

The screw of the both antenna cables (which comes from the transmit module) must be mounted at the ends of this holder.

The holder itself must be fastened with the Ant.Schraube into the old antenna socket of the transmitter.

Acrylic glass thickness: 3 mm
Colour of the holder: gray transparent (not as shown brown transparent).

Other types (other mechanical outlines) on request.
 incl. 19% V.A.T.
26.00 €
Shipping costs
without V.A.T.
(21.85 €)
Ant-Halter-HS.FUT
 
Ant-Halter-duo 		Long antenna holder
for one or two transmit antennas.

The screw of the both antenna cables (which comes from the transmit module) must be mounted at the ends of this holder.

The holder itself must be fastened by cable ties to the grip of the transmitter

Acrylic glass thickness: 3 mm
Colour of the holder: gray transparent (not as shown brown transparent).

Other types (other mechanical outlines) on request.
 incl. 19% V.A.T.
26.00 €
Shipping costs
without V.A.T.
(21.85 €)
Ant-Schraube.FUT
 
Ant-Schraube.FUT 		Fixing screw
for our antennea holder on the ball-and-socket joint of

Futaba transmitters
 incl. 19% V.A.T.
14.90 €
Shipping costs
without V.A.T.
(12.52 €)
Ant-Schraube.GRA-MPX
 
Ant-Schraube.GRA-MPX 		Fixing screw
for our antennea holder on the ball-and-socket joint of

Multiplex (MPX) and Graupner transmitters
 incl. 19% V.A.T.
14.90 €
Shipping costs
without V.A.T.
(12.52 €)
       
wave-Montage-PS
 
Dienstleistung 		Conversion standard price for the mounting
of the uno-wave.UNI or duo-wave.UNI modules
into desk-transmitters

(When you send your transmitter to us)
 incl. 19% V.A.T.
50.00 €
Shipping costs
without V.A.T.
(42.02 €)
wave-Montage-HS
 
Dienstleistung 		Conversion standard price for the mounting
of the uno-wave.UNI or duo-wave.UNI modules
into handheld-transmitters

(Costs - of expenditure - when you send your transmitter to us)
 incl. 19% V.A.T.
50.00 ... 100.00  €
Shipping costs
without V.A.T.
(42.02 ... 84.03 €)
       
S3D-switch-it.GRA
 
S3D-switch-it-GRA
Transmitter

Installation

Switch on 35 MHz
LED = OFF

Switch on 2,4 GHz
LED = ON
 Transmit-module switch

To switch between your existing transmit module (35 or 40 MHz) and the new wave transmit module (2,4 GHz) without changing cables or unmounting modules.

The LED shows when the 2.4 GHz module is active

Hint:
The switch is a latching type which cannot be operated accidentally:
the toggle must be lifted before it can be moved.

Especially for Graupner mc-17, mc-18, mc-19, mc-20, mc-22, mx-22(s), mc-24.


Mounting instructions
 incl. 19% V.A.T.
34.95 €
Shipping costs
without V.A.T.
(29.37 €)
S3D-switch-it.MPX
 
S3D-switch-it-MPX 		Transmit-module switch

- as above -

Especially for Multiplex mc 3010, mc 3030, mc 4000.


Mounting instructions
 incl. 19% V.A.T.
34.95 €
Shipping costs
without V.A.T.
(29.37 €)
S3D-switch-it.FUT
 
S3D-switch-it-FUT 		Transmit-module switch

- as above -

Especially for  Futaba FC-16, FC-18, FC-28, FX-14, FX-18.


Read notes in the mounting instructions when you switch to 2.4 GHz
Mounting instructions
 incl. 19% V.A.T.
34.95 €
Shipping costs
without V.A.T.
(29.37 €)
S3D-switch-it.FX40-int
 
S3D-switch-it-FX40 		Transmit module switch possibility by the transmitter firmware

Especially for  Futaba FX-40 to install the uno/duo-wave.UNI --> inside of <-- the FX40.

The old transmit module (35 or 40 MHz) and the new transmit module (2,4 GHz) can be used without changing cables or unmounting modules.

LED to show that the 2,4 GHz module is in use.

Intelligent
The switching between the modules works via the standard transmitter firmware and the touch display.
 incl. 19% V.A.T.
29.95 €
Shipping costs
Without V.A.T.
(25.17 €)
S3D-switch-it.FX40-ext
 
S3D-switch-it-FX40 		Transmit module switch possibility by the transmitter firmware

Especially for  Futaba FX-40 to place the uno/duo-wave.UNI --> outside of <-- the FX40 via the external TRAINER Socket.

The old transmit module (35 or 40 MHz) and the new transmit module (2,4 GHz) can be used without changing cables or unmounting modules.

No additional LED because the LEDs in the transmit module show if it works.

Intelligent
The switching between the modules works via the standard transmitter firmware and the touch display.
 incl. 19% V.A.T.
19.95 €
Shipping costs
without V.A.T.
(16.76 €)
       
S3D-switch-it.IFS
 
wave-umsch1 		Special transmit module switch

as above

But especially for Graupner IFS desk transmitters of the mc series.

With this gear it is possible to switch between Graupner IFS 2,4 GHz module and a Graupner 35 MHz module or a 40 MHz module.
 incl. 19% V.A.T.
89.00 €
Shipping costs
without V.A.T.
(74.79 €)


Price list accessories for wave receivers 2,4 GHz
Order
information		 Short description         Prices        
Ant-RX-S105R
 
Ant-RX.S105R 		Receiver antenna 2,4 GHz

Type: Stick
Total length about  105 mm
Connector type: R-SMA
Antenna gain: about 2 dBi

Use: e.g. boats with µwave-12.XA or -12.FA
 incl. 19% V.A.T.
14.90 €
Shipping costs
without V.A.T.
(12.52 €)
Ant-RX-S32R
 
Ant-RX.S32R 		Receiver antenna 2,4 GHz

Type: Stick
Total length about  32 mm
Connector type: R-SMA
Antenna gain: about not specified

Use: e.g. airplane with µwave-12.XA or -12.FA
 incl. 19% V.A.T.
14.90 €
Shipping costs
without V.A.T.
(12.52 €)
Ant-RX-W250R
 
Ant-RX.W250R 		Receiver antenna 2,4 GHz

Type: Trailing aerial
Total length about  250 mm
Connector type: R-SMA
Use: replacement aerial for µwave-12.FA (or -12.XA)
 incl. 19% V.A.T.
17.00 €
Shipping costs
without V.A.T.
(14.29 €)
Ant-RX-W400R
 
Ant-RX.W400R 		Receiver antenna 2,4 GHz

Type: Trailing aerial
Total length about  400 mm
Connector type: R-SMA
Use: replacement aerial for µwave-12.FA (or -12.XA)
 incl. 19% V.A.T.
19.00 €
Shipping costs
without V.A.T.
(15.97 €)
Ant-RX-W120U
 
Ant-RX.W120U 		Receiver antenna 2,4 GHz

Type: Trailing aerial
Total length about  120 mm
Connector type: U.FL
Use: Replacement aerial for µwave-4+2.WA and µwave-8*
(*) can only be changed in our firm - solder works necessary. 		incl. 19% V.A.T.
9.90 €
Shipping costs
without V.A.T.
(8.32 €)
Ant-RX-W180U
 
Ant-RX.W180U 		Receiver antenna 2,4 GHz

Type: Trailing aerial
Total length about  180 mm
Connector type: U.FL
Use: Replacemet aerial for µwave-8* and -12.WA
(*) can only be changed in our firm - solder works necessary. 		incl. 19% V.A.T.
9.90 €
Shipping costs
without V.A.T.
(8.32 €)
Ant-RX-W295U
 
Ant-RX.W295U 		Receiver antenna 2,4 GHz

Type: Trailing aerial
Total length about  295 mm
Connector type: U.FL
Use: Replacement aerial for µwave-12.WA
 incl. 19% V.A.T.
12.00 €
Shipping costs
without V.A.T.
(10.08 €)
       
DSL-Kabel
 
DSL-Kabel 		Connecting cable

Fitting for the DSL sockets on the
µwave-8 and µwave-12 receivers.

To enlarge the number of channels or making fourfold diversity with 2 receivers.

Cable length about: 240 mm
 incl. 19% V.A.T.
14.95 €
Shipping costs
without V.A.T.
(12.56 €)
RX-Powerkabel
 
RX-Powerkabel 		High current connector with cable

Applicable to the high current sockets of the
µwave-12 receivers.

Cable length about: 170 mm
 incl. 19% V.A.T.
5.90 €
Shipping costs
without V.A.T.
(4.96 €)


Price list replacement parts and accessories
for wave transmitters and receivers 2,4 GHz
Order
information		 Short description         Prices        
Ant-Kab-100UR
 
Ant-Kab-100UR 		Connecting cable 2,4 GHz

Cable diameter about 1,2 mm
Total length about  100 mm

Connector type:
1x U.FL
for uno/duo-wave
and
1x R-SMA - straight
to mount into the antenna holder

Use: Im wave-Sende-Modul eingestecktes HF-Connecting cable zur Antennen-Schraubverbindung
 incl. 19% V.A.T.
17.90 €
Shipping costs
without V.A.T.
(15.04 €)
Ant-Kab-300UR
 
Ant-Kab-300UR 		Connecting cable 2,4 GHz

Cable diameter about 1,2 mm
Total length about  300 mm

Connector type:
1x U.FL
für uno/duo-wave
und
1x R-SMA - gerade
to mount into the antenna holder

Use: Im wave-Sende-Modul eingestecktes HF-Connecting cable zur Antennen-Schraubverbindung und für den µwave-12.XA
 incl. 19% V.A.T.
19.90 €
Shipping costs
without V.A.T.
(16.72 €)
Ant-Verl-100RR
 
Ant-Verl-100RR 		Verlängerungskabel 2,4 GHz

Cable diameter about 2,6 mm
Total length about  100 mm

Connector type:
1x R-SMA - angled
für uno/duo-wave, µwave12.FA, µwave12.XA
und
1x R-SMA - gerade
to mount into the antenna holder or in the fuselage

Use: Verlängerung zwischen
Sende- bzw. Empfangs-Modul und Antenne
 incl. 19% V.A.T.
29.90 €
Shipping costs
without V.A.T.
(25.13 €)
Ant-Verl-200RR
 
Ant-Verl-200RR 		Extension cable 2,4 GHz

Cable diameter about 2,6 mm
Total length about  200 mm

Connector type:
1x R-SMA - angled
für uno/duo-wave, µwave12.FA, µwave12.XA
und
1x R-SMA - gerade
zur Montage in die Antennen-Halter bzw. zur Rumpfmontage

Use: Verlängerung zwischen
Empfangs-Modul und Antenne
 incl. 19% V.A.T.
31.90 €
Shipping costs
without V.A.T.
(26.81 €)
Ant-Verl-400RR
 
Ant-Verl-400RR 		Extension cable 2,4 GHz

Cable diameter about 2,6 mm
Total length about  400 mm

Connector type:
1x R-SMA - angled
for uno/duo-wave, µwave12.FA, µwave12.XA
and
1x R-SMA - straight
to mount into the antenna holder or in the fuselage

Use: Extension between
receiver and antenna
 incl. 19% V.A.T.
35.90 €
Shipping costs
without V.A.T.
(30.17 €)
Ant-Verl-xxxRR
 
Ant-Verl-xxxRR 		Extension cable 2,4 GHz

Cable diameter = 2.6 mm
Total length between 400 mm to 2000 mm on request

Connector type:
1x R-SMA - angled
for uno/duo-wave, µwave12.FA, µwave12.XA
and
1x R-SMA - straight
to mount in our "Antennen-Halter" or for mounting in the fuselage

Use: Extension between
receiver and antenna
 incl. 19% V.A.T.
45.00 €
Shipping costs
without V.A.T.
(37.81 €)
Binding button
 
Binding-Taster

Picture similar
 Binding button

Use: for transmitter modules and receivers
 incl. 19% V.A.T.
7.50 €
Shipping costs
without V.A.T.
(6.30 €)
Binding jumper
 
Binding-Stecker
 Binding jumper

Use: for transmitter modules and receivers
 incl. 19% V.A.T.
2.00 €
Shipping costs
without V.A.T.
(1.68 €)


Prieislistece list
Accessories for µwave and alpha-receivers (with Point)
to connect them to the PC.
Order
information		 Short description         Prices                 HotLinks        
USB-adapt-uni

USB-adapt-5V-SIO 		Interface adaptor
to connect to the 5 V-SIO connector
of the nextGeneration series
as well as to the LiPoCard2 und e.g..
also to the u-force speed controller
and to the prog-adapt-alpha.

Accessories not included:
• USB-driver (load down here).
• USB-cable (see below). 		incl. 19% V.A.T.
30.00 €
Shipping costs
without V.A.T.
(25.21 €)
 Operating instructions
prog-adapt-µwave

prog-adapt-µwave
 Interface adapter
to connect
all µwave-receivers and
the alpha-point-receivers
and on the other side the
5V-SIO connectors of the
USB-adapt-uni or
prog-adapt-uni
cables.
 incl. 19% V.A.T.
21.90 €
Shipping costs
without V.A.T.
(18,40 €)
 Operating instructions

Applicated to the µwave4+2 or alpha-point

Applicated to the µwave8

Applicated to the µwave12
prog-adapt-alpha

prog-adapt-alpha 		Interface adapter
to install between the
alpha-point-receivers
and the 5V-SIO connectors of the
USB-adapt-uni or prog-adapt-uni
cables. 		incl. 19% V.A.T.
12.30 €
Shipping costs
without V.A.T.
(10.34 €)
 Operating instructions
USB-adapt-alpha

USB-adapt-alpha 		Interface adapter
to connect our
alpha "point series" receivers
to the USB port of a PC.

Accessories not included:
• USB-driver (load down here).
• USB-cable (see below). 		incl. 19% V.A.T.
25.00 €
Shipping costs
without V.A.T.
(21.01 €)
 Operating instructions
USB-adapt-
alpha-Set

USB-adapt-5alpha-Set 		Interface adapter set
to connect our
alpha "point series" receivers
to the USB port of a PC.

Accessories included:
• USB-stick with 128 MB
• USB-driver on the stick.
• USB-cable to connect to a PC. 		incl. 19% V.A.T.
45.00 €
Shipping costs
without V.A.T.
(37.82 €)
 Operating instructions
USB-adapt-uni-Set
 
USB-adapt-5V-SIO-Set 		Interface adaptor set
to connect to the 5 V-SIO connector
of the nextGeneration series
as well as to the LiPoCard2 und e.g..
also to the u-force speed controller
and to the prog-adapt-alpha.

Accessories included:
• USB-stick with 128 MB
• USB-driver on the stick.
• USB-cable to connect to a PC. 		incl. 19% V.A.T.
50.00 €
Shipping costs
without V.A.T.
(42.02 €)
 Operating instructions
USB-Stick128

USB-Stick128 		USB-Stick with 128 MB

Included on the stick:
• USB driver for our
USB interfaces.
• Operating instructions for the
nextGeneration
charger/discharger series
• NextGeneration firmware with different language pairs. 		incl. 19% V.A.T.
15.99 €
Shipping costs
without V.A.T.
(13.44 €)
 Operating instructions
USB-Kabel

USB cable 2 m 		USB cable

To connect our USB adaptors
to the personal computer (PC).

- A to B - 2 m - light grey - 		incl. 19% V.A.T.
5.90 €
Shipping costs
without V.A.T.
(4.96 €)
 -

Copyright © 1996-2007 Schulze Elektronik GmbH. All trademarks shown are trademarks of their respective owners. All rights reserved.
http://www.schulze-elektronik-gmbh.com, designed by matthias schulze