Preisliste Zubehör für Ladegeräte / Entladegeräte / Balancer / Equalizer

prs72_e.htm,updated: 01 SEP 2008; 19% VAT

Price list accessories for chargers / dischargers / balancers

Services about lithium packs

Order term and picture	Short description	Prices
Retrofit BalCab10	Retrofitting of foreign packs with the BalCab10 socket in our firm in Weiterstadt The battery can be equipped with a socket of a pin spacing of 2.54 mm or 2.00 mm. On the other hand the connection to the BalCab10 socket will be made by soldering. For 2s, 3s or 4s packs. Hint: BalCab10-Verl necessary.	with 19% V.A.T. 19.28 € Shipping without V.A.T. (16.20 €)
Retrofit BalCab20	Retrofitting of foreign packs with the BalCab20 socket in our firm in Weiterstadt The battery can be equipped with a socket of a pin spacing of 2.54 mm or 2.00 mm. On the other hand the connection to the BalCab20 socket will be made by soldering. For 5s to 14s packs. Hint: BalCab20-Verl necessary.	with 19% V.A.T. 25.97 € Shipping without V.A.T. (21.82 €)

LadBalTrak.4mm	Charge cable with integrated balancing connector Especially designed for TrakPaks We used our charge cable which has a length of 70 cm and is equipped with safety 4 mm "banana" plugs on the one end and two 4 mm plugs plus a 2 mm plug on the other end. It includes also the BalCab10 connector with the fitting resistor for the current setting. Hint: Only for chargers with 4 mm charge sockets (e.g. nextGeneration).	with 19% V.A.T. 35.00 € Shipping without V.A.T. (29.41 €)
LadBalTrak.mpx	Charge cable with integrated balancing connector Especially designed for TrakPaks We used a charge cable which has a length of 70 cm and is equipped with the high current MPX plug on the one end and two 4 mm plugs plus a 2 mm plug on the other end. It includes also the BalCab10 connector with the fitting resistor for the current setting. Hint: Only for chargers with MPX charge sockets (e.g. LiPoCardII).	with 19% V.A.T. 30.00 € Shipping without V.A.T. (25.21 €)

Melody module for NextGeneration chargers

Order term	Short description	Prices	Hot-Links
Next-mel	Plug-in module with 12 melodies and a loudspeaker. Polyphonic sound up to 8 notes (16 bit DAC). Plays a selected melody when battery is "full" or "empty".	with 19% V.A.T. 38.90 € Shipping without V.A.T. (32.69 €)	Features & Specifications Operating instructions

Special balancer adapter printed circuit boards for LiPoCard, LiPo(Profi)Balancer and nextGeneration.

Order term and picture	Short description	Prices	Hot-Links
BalAd-Ko4	Balancing adapter printed circuit board with connector pins. Pin spacing is 2.54 mm. For 2s, 3s or 4s packs. Hint: BalCab10-Verl necessary.	with 19% V.A.T. 10.50 € Shipping without V.A.T. (8.82 €)	Features & Specifications Operating instructions
BalAd-TP4	Balancing adapter printed circuit board with connector pins. Pin spacing is 2.00 mm. For 2s, 3s or 4s packs. Hint: BalCab10-Verl necessary.	with 19% V.A.T. 10.50 € Shipping without V.A.T. (8.82 €)	Features & Specifications Operating instructions

Order term and picture	Short description	Prices	Hot-Links
BalAd-Ko8	Balancing adapter printed circuit board with connector pins. Pin spacing is 2.54 mm. For 2s ... 8s packs. Hint: Integrated BalCab20 connector for a direct connection to Schulze chargers and/or balancers.	with 19% V.A.T. 19.00 € Shipping without V.A.T. (15.97 €)	Features & Specifications Operating instructions
BalAd-Ko12	Balancing adapter printed circuit board with connector pins. Pin spacing is 2.54 mm. For 2s ... 12s packs. Hint: Integrated BalCab20 connector for a direct connection to Schulze chargers and/or balancers.	with 19% V.A.T. 19.00 € Shipping without V.A.T. (15.97 €)	Features & Specifications Operating instructions

BalAd-TP14	Balancing adapter printed circuit board with connector pins. Pin spacing is 2.00 mm. For 2s ... 14s packs. Hint: Integrated BalCab20 connector for a direct connection to Schulze chargers and/or balancers.	with 19% V.A.T. 19.00 € Shipping without V.A.T. (15.97 €)	Features & Specifications Operating instructions

Special Balancer-cables for LiPoCard, LiPo(Profi)Balancer and nextGeneration.

Connector-cable-kit for your present batteries.
Ready to use 10- and 20-lead "extension"-cables for Schulze LiPoPerfekt battery packs.
Enables your Schulze LiPoCard, nextGeneration and LiPo(Profi)Balancer to work in automatic mode.

Order term and picture	Short description	Prices	Hot-Links
BalCab10-Set	Kit for 3 Balancer-cables. 10-lead cable. For packs up to 4 cells.	with 19% V.A.T. 6.77 € Shipping without V.A.T. (5.69 €)	Features Mounting instructions
BalCab20-Set	Kit for 3 Balancer-cables. 20-lead cable. For packs up to 14 cells.	with 19% V.A.T. 8.41 € Shipping without V.A.T. (7.07 €)	Features Mounting instructions
BalCab10-Verl	Extension cable for 10 pin connectors. To connect Schulze *LiPoPerfekt* battery packs of 2s - 4s to the LiPoCard(2) or to the LiPo(Profi)Balancer.	with 19% V.A.T. 9.13 € Shipping without V.A.T. (7.67 €)	Features Mounting instructions
BalCab20-Verl	Extension cable for 20 pin connectors. To connect Schulze *LiPoPerfekt* battery packs of 5s - 14s to the LiPo(Profi)Balancer.	with 19% V.A.T. 11.69 € Shipping without V.A.T. (9.83 €)	Features Mounting instructions

Accessories for nextGeneration charger/discharger:
Interfaces for/with different purposes.
Hint on "nextConn"
It is included as a standard in:
next 6.30-5 plus, next 7.36-8 and next 10.36-8.

Order Term

Short Description

Prices

Hot-Links

nextConn-Set

Interface PrintedCircuitBoard
with 4 connectors.
Plug it on a connector
inside of the next 6.30-5.

Accessories included:
• USB-stick with 128 MB
• USB-driver on the stick.
• USB-cable to connect to the PC.
• Temperature sensor with
cable and connector
• 2 switching outputs for light and fan
with 2 meters cables and connectors
as well as
• 1 side panel of the charger with
the fitting holes (not on the picture).

with 19% V.A.T.
85.00 €

Shipping costs

without V.A.T.
(71.43€)

Features
Specifications
Operating instructions

USB-adapt-uni

Interface adaptor
to connect to the 5 V-SIO connector
of the nextGeneration series
as well as to the LiPoCard2 und e.g..
also to the u-force speed controller
and to the prog-adapt-alpha.

Accessories not included:
• USB-driver (load down here).
• USB-cable (see below).

with 19% V.A.T.
30.00 €

Shipping costs

without V.A.T.
(25.21 €)

Features
Specifications
Operating instructions

USB-adapt-uni-Set

Interface adaptor
to connect to the 5 V-SIO connector
of the nextGeneration series
as well as to the LiPoCard2 und e.g..
also to the u-force speed controller
and to the prog-adapt-alpha.

Accessories included:
• USB-stick with 128 MB
• USB-driver on the stick.
• USB-cable to connect to the PC.

with 19% V.A.T.
50.00 €

Shipping costs

without V.A.T.
(42.02€)

Features
Specifications
Operating instructions

USB-Stick128

USB-Stick with 128 MB

Included on the stick:
• USB driver for our
USB interfaces.
• Operating instructions for the
nextGeneration
charger/discharger series
• NextGeneration firmware with different language pairs.

with 19% V.A.T.
15,99 €

Shipping costs

without V.A.T.
(13,44 €)

Features
Specifications
Operating instructions

USB-Kabel

USB cable

To connect our USB adaptors
to the persomal computer (PC).

- A to B - 2 m - light grey -

with 19% V.A.T.
5.90 €

Shipping costs

without V.A.T.
(4.96 €)

Features
Specifications
Operating instructions

interface, interconnecting cable, test lead wires

Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
prog-adapt- uni	Cable to connect devices with 5 volt SIO to a RS232 port (COMx) of personal computers. Level shift electronics integrated.	29.75	(25.00)
RS232-cable	RS232 interconnecting cable with 9-pin SUB-D socket <--> charger socket	19.49	(16.38)
RS232-extension cable	Extension cable to connect the RS232 port of the LiPoBal to the RS232 port (COMx) of personal computers.	3.59	(3.02)
RS232-USB-adapt	Adaptor to connect a RS232 connector to the USB port of personal computers. It is delivered with driver-software and so far with an aditional 80 cm (31") extension cable.	22.52	(18.92)
i6-RS-schn	RS 232 Interface converter to be mounted into isl 6 charger series housing	22.57	(18.97)
i6-RS-cab	Interconnecting cable between isl 6 and PC	8.21	(6.90)
i6-RS-einb	Fixed price for mounting the i6-RS-schn	14.36	(12.07)
packages	for complete software updates / installing / retrofitting see section B7.1 software	-.-	(-.-)

accessories for charging/discharging devices

Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
charging cables	1 pair, 2.5mm², 75cm, red&black, safety-plug with 4mm slide-sleeve	11.28	(9.48)
CE-cab-i6	pair of charging cables, 2.5mm², 15cm, red&black, safety-plug, CE-tube	13.34	(11.21)
CE-cab-i8	pair of charging cables, 2.5mm², 15cm, red&black, safety-plug, CE-ring	16.41	(13.79)

LCD with Backlight for isl 8

	Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
	isl 8-LCD-LeuchtSet	isl 8-LCD-LightSet consists of: LCD with backlight foil, voltage converter for the backlight foil, mounting: Dismantling old Display; Mounting/wiring of the voltage converter; Mounting new display. (Only available in limited quantity)	sold	out

external discharge loads

Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
isl 8-elast-kk	external discharge load (... 14 cells) with cooling fins	58.47	(49.14)
isl 8-elast-zkab	additional cable for above	16.41	(13.79)

Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
isl 8-elast-vent	external discharge load (... 14 cells) with fan 1.5 Ohm/150W, about 85x85x105mm	58.79	(49.14)
eco- elast- 0.30	external discharge load (4 cells) with fan 0.30Ohm/300W, about 85x85x105mm	92.33	(77.59)
eco- elast- 0.40	external discharge load (6 cells) with fan 0.40Ohm/300W, about 85x85x105mm	80.02	(67.24)

Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
isl 8- elast- 0.33	external discharge resistor (... 7cells) with fan 0.33Ohm/300W, about 85x85x105mm	92.33	(77.59)
isl 8- elast- 0.66	external discharge resistor (... 12cells) with fan 0.66Ohm/300W, about 85x85x105mm	92.33	(77.59)

option for isl 6-series
(not for isl 6-330d; for retrofitting the old isl 6-636e only 12V constant voltage fan output)

Order Term	Description	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
i6-schaltaus	switch output 12V/2A, fused	for 'battery full' indication and cooling fan output (isl 6 software V 7 necessary).	16.41	(13.79)

interference suppression

Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
CE-tubus	ferrit-tube for EMV-interference suppression of charging cables	2.56	(2.16)
CE-ring	ferrit-ring for EMV-interference suppression of charging cables	3.59	(3.02)
CE-ring+	ferrit-ring for EMV-interference suppression of battery leads	5.13	(4.31)

clamp station with additional capacitors

	Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
	uka6	universal-clamp-adaptor for power supplies and/or terminator for long cables. not necessary in combination with our switching power supplies NT-16A, NT-25A, NT-40A2.	19.49	(16.38)

fan

	Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
	lüfter- 12V- 2,6W	cooling fan for hot batteries with safety grille	13.34	(11.21)

terminal clamps

	Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
	polzangen+	terminal clamps for the banana plugs of the ecolader	9.23	(7.76)

More accessories: 5.7 power supplies