next-mel-e.htm, updated: 10 MAR 2008
next-mel

The melody module (sound module) for the nextGeneration charger series

The next-mel module can easily mounted into the chargers of the nextGeneration series.
To operate the next-mel module it is necessary that the nextGeneration works with the firmware version 1.20 or higher.
The firmware can be downloaded from the section C 3 of our Homepage "nextGen-firm"

The working adjustments for the melody module has to be carried out in the device parameter set no. 1 (above the pass word input: line 6 right).

The menu shows 2 numbers: selected melody, loudness.
These parameters are only alterable when the melody module is plugged in.

At first one of 12 melodies (or 0 = off) must be selected, then the loudness can be selected in the range of 5...15.

The selected melody is playing for 30 seconds after detecting a „full“ or „flat“ battery.
By pressing <+> the melody can be interrupted prematurely.

Copyright © 1996-2008 Schulze Elektronik GmbH.
All trademarks shown are trademarks of their respective owners.
All rights reserved.
http://www.schulze-elektronik-gmbh.de, designed by matthias schulze.