balcab-e.htm; updated: 23 NOV 2005 schulze elektronik gmbh

Schulze BalCab10-Verl resp. Schulze BalCab20-Verl

30 cm (12") extension cables to connect
all Schulze LiPoPerfekt battery packs with
the Schulze LiPoCard or
the Schulze LiPoBalancers.

Schulze BalCab10-Set resp. Schulze BalCab20-Set

Three cable sets (10- resp. 20-poles) for self-configuration.

These balancer cables are not only suited to connect Your Lithium battery pack (up to 14 poles) to our stand alone
genuine balancers Schulze LiPoBal08 resp. Schulze LiPoBal14,
but also to our ingenious Schulze LiPoCard, the small sized charger with buildt-in balancers.

The Schulze LiPoCard owns a new quasi-automatic charge function, which only can used with this special balancer cable.

In principle you can charge any Lithium-Ion or Lithium-Polymer battery with up to four cells using the Schulze LiPoCard without the balancer socket. Lithium batteries with a conventional balancer socket can also be connected to the Schulze-LiPoCard, if necessary using a balancer adaptor. However, if you use either of these methods it is essential to set the Schulze-LiPoCard to the permissible charge current for the pack in question, and - if no balancer cable is connected - you must set the cell count (number of cells) manually by the two pushbuttons for reasons of safety.

To avoid having to re-configure your Schulze LiPoCard separately for each battery, the Schulze LiPoCard features a quasi-automatic function:
A special Balancing Cable (Schulze BalCab10) is used to inform the Schulze LiPoCard of the battery-specific data.

The cable can easily be assembled using the parts in this Schulze BalCab10-Set (10-pole BalancingCable-Set for the assembling of three Schulze balancer cables). This cable features three more connectors/leads than usual. The electronics of the Schulze LiPoCard use these additional terminals to detect the type of battery connected to it, and the permissible charge current for that battery type. These instructions of the Schulze BalCab10-Set describe how the completed Balancer Cable should look, and how the three configuration connectors have to be wired.
This Instruction can be downloaded from this homepage (independent from the purchase of the cable set).

"Specifications" Schulze BalCab10-Set

Contents Schulze BalCab10-Set Weight

10-pole sockets 3 (with strain relief) 2 grams each

10-pole cable 1 meter "rainbow coloured" 18 grams / meter

trimming pots 0 - 5 KiloOhm 3 0,2 grams each

Instruction for the cable-configuration 1 -

max. direct-charge current
through BalCab10 1 amp when wired correctly
(two -battery / +battery leads each connected parallel) (without additional charge cable)

"Specifications" Schulze BalCab20-Set

Contents Schulze BalCab10-Set Weight

20-pole sockets 3 (with strain relief) 4 grams each

20-pole cable 1 meter "rainbow coloured" 36 grams / meter

trimming pots 0 - 5 KiloOhm 3 0,2 grams each

Instruction for the cable-configuration 1 -

max. direct-charge current
through BalCab20 (only available in future designed chargers) (without additional charge cable)

BalCab10-Verl (ExtensionCable 10pol.)
To connect the
Schulze LiPoPerfekt battery packs to
the LiPoCard resp. the LiPoBalancers.
extension cable 10-poles BalCab20-Verl (ExtensionCable 20pol.)
To connect the
Schulze LiPoPerfekt battery packs to
the LiPoBalancers.
extension cable 20-poles

Schulze LiPoCard 2006 connected to a Schulze LiPoPerfekt battery pack
(using the "BalCab10-Verl" extension cable)
LiPoCard and battery

... and for your present battery packs ...

balancing cable set (10-poles)
cable set 10-poles

balancing cable set (20-poles)
cable set 20-poles

10-poles balancing cable
semi-mounted from 1/3 of the "kit"

20-poles balancing cable
semi-mounted from 1/3 of the "kit"

Prepairing the cable using about a third part of a BalCabSet and more
Step1+2

Fasten, cut to length, cofiguration
Manufacturing Ready wired and insulated
Insolation

In use with 2s1p
In use with 3s7p

Contents	*Schulze BalCab10-Set*	Weight
10-pole sockets	3 (with strain relief)	2 grams each
10-pole cable	1 meter "rainbow coloured"	18 grams / meter
trimming pots 0 - 5 KiloOhm	3	0,2 grams each
Instruction for the cable-configuration	1	-
max. direct-charge current through BalCab10	1 amp when wired correctly (two -battery / +battery leads each connected parallel)	(without additional charge cable)